SPA MAINTENANCE TIPS
CHEMICALS YOU WILL NEED
AFTER EVERY USE:
Add 1 capful of Non-Chlorine Shock
(If spa is not used daily, add 1-2 capfuls every 4-5 days to refresh the water.)
Recommended brands: Renew, Fresh-N-Clear, Activate, Shox
AFTER HEAVY USE:
1. Add 1 capful Bromine Concentrate and set filtration cycle to F8
2. Wait 24 hours and set filtration back to F2
3. Clean filter
ONCE PER WEEK:
Place 2 Bromine Tablets in filter basket or floater
ONCE PER WEEK:
Check PH Levels
The levels will only fluctuate low, so only use PH Increaser (baking soda) or Spa Up.
Do not use PH Lock or Balance!
ONCE PER WEEK:
Clean Filter
(If spa is used less than 4 days per week, clean filter every 2 weeks.)
EVERY 3 MONTHS:
Drain and Clean Spa
Use Spa Foam Down when necessary.
Check Calcium Level after filling with new water.
(Once Calcium Levels are set, they're good for the life of the water.)
CHEMICALS YOU WILL NEED
- non-chlorine shock
- bromine concentrate
- bromine tablets
- test strips
- PH increaser
- spa foam down
- calcium
AFTER EVERY USE:
Add 1 capful of Non-Chlorine Shock
(If spa is not used daily, add 1-2 capfuls every 4-5 days to refresh the water.)
Recommended brands: Renew, Fresh-N-Clear, Activate, Shox
AFTER HEAVY USE:
1. Add 1 capful Bromine Concentrate and set filtration cycle to F8
2. Wait 24 hours and set filtration back to F2
3. Clean filter
ONCE PER WEEK:
Place 2 Bromine Tablets in filter basket or floater
ONCE PER WEEK:
Check PH Levels
The levels will only fluctuate low, so only use PH Increaser (baking soda) or Spa Up.
Do not use PH Lock or Balance!
ONCE PER WEEK:
Clean Filter
(If spa is used less than 4 days per week, clean filter every 2 weeks.)
EVERY 3 MONTHS:
Drain and Clean Spa
Use Spa Foam Down when necessary.
Check Calcium Level after filling with new water.
(Once Calcium Levels are set, they're good for the life of the water.)